Kenmore C970-40853 Manual de usuario descargar pdf (Pagina 11)



Setting Cooktop Controls



The Cooking Zones have separate Power Level displays.

Once active, the Cooking Zones will provide 25 Power Levels

to choose from. These include Hd, lo, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2,

2.4, 2.8, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5,

9.0, 9.5, hi, Pb. The highest setting of Pb or “Power Boost”

provides up to 139% power for 10 minutes (except for the

right cooking zone on the 36” model which gives you 6

minutes of power boost). Each key pad touch (or just holding

down the Power Level key pad) will scroll through all the

available power levels for any Cooking Zone quickly.

Preheat Recommendations

When preheating a pan on the cooktop always watch

carefully. Whenever using the cooktop, always pay attention

to any items cooking and remain attentive until the cooking

process is complete.

Keep in mind that induction may decrease the amount of

time required to preheat a cooking utensil.

Residual Heat

Once any Cooking Zone has been used for cooking and

turned OFF, and if the cooktop surface temperature on any

of the Cooking Zones is still too HOT, HE will appear in the

display of the aected Cooking Zone. The HE will continue

to display if the temperature is still too HOT.



 Fluids spilled or objects lying on the controls area of the

cooktop may cause the cooktop to display an error code

and turn OFF while cooking. Clean the spills or remove the

objects from the cooktop.

 Be sure the cooktop vent holes are NOT blocked. If the

vent holes are blocked the cooktop internal sensor may

shut OFF the cooktop to avoid overheating the appliance.

• If the cookware or pan is moved from the center of any

active Cooking Zone for any reason, a sensor will detect the

situation and the cookware will no longer heat. The aected

Cooking Zone display will ash the power level set for the

Cooking Zone. The Cooking Zone will remember the power

level setting for up to 3 minutes before the Cooking Zone

will automatically shut OFF.

Pan Detection

All Cooking Zones will provide a Pan Detection message. If

a Cooking Zone is turned ON and no pan is detected, or

the pan has been moved or is not centered correctly, or is

not made of magnetic material, the power level will ash

in the aected Cooking Zone display. If no pan is detected,

no heat will be generated and the cooking zone will turn o

after 3 minutes.



The control display will show C then XX and if the surface is

hot it will show C then XX then HE and then it will repeat. For

service, call .

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comentarios a estos manuales

Sin comentarios

Kenmore C970-40853 Manual de usuario Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Kenmore C970-40853